Products

Mineral Insulated Thermocouples with IECEx Approval

Pot seal termination
0.5 to 8.0mm dia.
supplied with extension cable or tails
Die cast alloy head (IP68)
4.5 to 8.0mm dia.
Suitable for simplex, duplex and triplex assemblies, supplied with a weatherproof die cast alloy screw top terminal head with ceramic terminal block
Die cast alloy head (IP68)
and process thread
Suitable for simplex, duplex and triplex assemblies, supplied with a weatherproof die cast alloy screw top terminal head with ceramic terminal block
Stainless Steel head (IP68) 4.5 to 8.0mm dia. Suitable for simplex, duplex and triplex assemblies, supplied with a weatherproof stainless steel screw top terminal head with ceramic terminal block Stainless Steel head (IP68) with process thread Suitable for simplex, duplex and triplex assemblies, supplied with a weatherproof stainless steel screw top terminal head with ceramic terminal block Dual entry head (IP68)
4.5 to 8.0mm dia.
Suitable for simplex, duplex and triplex assemblies, supplied with a weatherproof dual entry die cast alloy screw top terminal head with ceramic terminal block
Dual entry head (IP68)
and process thread
Suitable for simplex, duplex and triplex assemblies, supplied with a weatherproof dual entry die cast alloy screw top terminal head with ceramic terminal block
Spring loaded terminal
block 3.0 to 8.0mm dia.
Suitable for mounting into a standard terminal head. Spring loaded insert.
Terminal Entry Gland termination 1.0 to 8.0mm dia. 16mm or 20mm ISO x 1.5mm compression fitting seal supplied with either tails or extension cable Terminal Entry Gland termination and process thread 16mm or 20mm ISO x 1.5mm compression fitting seal supplied with either tails or extension cable Spring Loaded Thermocouplesuitable for installation in a thermowell pocket which requires a good contact with the process Thermocouple Feedthrough Assemblies gives the ability to extend a thermocouple signal over distances up to 120 metres
BACK TO TOP
IECEx Thermocouples with Pot Seal

IECEx Thermocouples with Die Cast Alloy Head

IECEx Thermocouples with Die Cast Alloy Head and Process Connection

IECEx Thermocouples with St. / Steel Head

IECEx Thermocouples with St. / Steel Head and Process Connection

IECEx Thermocouples with Dual Entry Head

IECEx Thermocouples with Dual Entry Head and Process Connection

IECEx Thermocouples with Spring Loaded Terminal Block

IECEx Thermocouples with Terminal Entry Gland

IECEx Thermocouples with Terminal Entry Gland and Process Connection

IECEx Spring Loaded Thermocouples

IECEx Thermocouple Feedthroughs
IECEx RTD Pt100 Sensors with Pot Seal

IECEx RTD Pt100 Sensors with Die Cast Alloy Head

IECEx RTD Pt100 Sensors with Die Cast Alloy Head and Process Connection

IECEx RTD Pt100 Sensors with St. / Steel Head

IECEx RTD Pt100 Sensors with St. / Steel Head and Process Connection

IECEx RTD Pt100 Sensors with Dual Entry Head

IECEx RTD Pt100 Sensors with Dual Entry Head and Process Connection

IECEx RTD Pt100 Sensors with Spring Loaded Terminal Block

IECEx RTD Pt100 Sensors with Terminal Entry Gland

IECEx RTD Pt100 Sensors with Terminal Entry Gland and Process Connection

IECEx Spring Loaded RTD Pt100 Sensors
IECEx 4 to 20mA Indicators

IECEx Temperature Transmitters

IECEx Compression Fittings

IECEx Terminal Heads

IECEx Pressure and Vacuum Feedthroughs



© 2014- TC Ltd., PO Box 130, UXBRIDGE UB8 2YS United Kingdom.
Tel.: 01895 252222, Fax: 01895 273540, Email: info@tc.co.uk