Products

IECEx Approved Pressure and Vacuum Feedthroughs

Series MF - Feedthroughs for multiple elements

With the use of an MF fitting, multiple probes, sensors and other similar elements can pass through a single access port into an enclosure or process.

Various sensor quantity and hole diameter combinations are available, please consult the table below for accurate options. These include (up to): 40 x 1.0mm diameter, 27 x 3.0mm and 7 x 6.0mm elements.

There are five body sizes having 1/8”, 1/4”, 1/2”, 3/4” and 1”process connections in either BSPT (conical gas or DIN 2999 ‘R’) and NPT threads.

Five body sizes are available, in either BSPT or NPT threads: 1/8”, 1/4”, 1/2”, 3/4” and 1”.

Elements can be replaced, removed or adjusted at any time, providing they are not under pressure or vacuum conditions. They are designed to be easy to use, from assembly to installation.
  • Through the use of one fitting, multiple sensors can pass into pressure or vacuum environments, saving time and costs
  • IECEx Approved to Ex II 2 GD, Ex d IIC Gb / Ex e IIC Gb, Ex ta IIIC Da
  • The amount the sensor protrudes into the process can be adjusted easily
  • The following thread sizes are available: 1/8", 1/4", 1/2", 3/4" and 1"
  • Designed for multiple probes, tubes or sensors to be passed through
  • A wide range of element can be carried
  • Pressure range is from Vacuum to 700 bar*
  • Temperature ranged from -60°C to +450°C*
  • All metal parts are made from 316L Stainless Steel
  • The internal parts and sealants can all be replaced
  • * Dependent on sealant and fitting selected

Enquiry Form

1. Thread Size Required


  see table

2. Element diameter


 see table

3. No. of Elements


 see table

4. Sealant Type


 see table

5. Quantity Required


Contact Details


Company Name


Your Name


Email


Telephone


Additional Information


If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below



Send Enquiry  
BACK TO TOP
IECEx Thermocouples with Pot Seal

IECEx Thermocouples with Die Cast Alloy Head

IECEx Thermocouples with Die Cast Alloy Head and Process Connection

IECEx Thermocouples with St. / Steel Head

IECEx Thermocouples with St. / Steel Head and Process Connection

IECEx Thermocouples with Dual Entry Head

IECEx Thermocouples with Dual Entry Head and Process Connection

IECEx Thermocouples with Spring Loaded Terminal Block

IECEx Thermocouples with Terminal Entry Gland

IECEx Thermocouples with Terminal Entry Gland and Process Connection

IECEx Spring Loaded Thermocouples

IECEx Thermocouple Feedthroughs
IECEx RTD Pt100 Sensors with Pot Seal

IECEx RTD Pt100 Sensors with Die Cast Alloy Head

IECEx RTD Pt100 Sensors with Die Cast Alloy Head and Process Connection

IECEx RTD Pt100 Sensors with St. / Steel Head

IECEx RTD Pt100 Sensors with St. / Steel Head and Process Connection

IECEx RTD Pt100 Sensors with Dual Entry Head

IECEx RTD Pt100 Sensors with Dual Entry Head and Process Connection

IECEx RTD Pt100 Sensors with Spring Loaded Terminal Block

IECEx RTD Pt100 Sensors with Terminal Entry Gland

IECEx RTD Pt100 Sensors with Terminal Entry Gland and Process Connection

IECEx Spring Loaded RTD Pt100 Sensors
IECEx 4 to 20mA Indicators

IECEx Temperature Transmitters

IECEx Compression Fittings

IECEx Terminal Heads

IECEx Pressure and Vacuum Feedthroughs



© 2014- TC Ltd., PO Box 130, UXBRIDGE UB8 2YS United Kingdom.
Tel.: 01895 252222, Fax: 01895 273540, Email: info@tc-atex.com