Products

IECEx Approved Pressure and Vacuum Feedthroughs

Series PF - Feedthroughs for single elements

Where a sensor, probe, tube or other single element needs to penetrate a pressure or environmental boundary, series PF glands can be used.

The following thread sizes are available: 1/8", 1/4", 1/2", 3/4" and 1" with BSPT (conical gas or DIN 2999 ‘R’) and NPT threads. The minimum element size is 0.5mm, the maximum is 25.4mm (1").

Elements can be adjusted, removed and replaced when not under pressure or vacuum conditions. Spectite® feedthroughs are designed for ease of assembly and installation.
  • Sensors, small bore tubes, probes and more can be used with a PF fitting
  • IECEx Approved to Ex II 2 GD, Ex d IIC Gb / Ex e IIC Gb, Ex ta IIIC Da
  • The immersion depth of the sensor can be adjusted very easily and as many times as necessary
  • The following thread sizes are available: 1/8", 1/4", 1/2", 3/4" and 1"
  • Easy installation of single elements 0.5mm to 25.4mm (1”) diameter
  • Temperature ranged from -60°C to +450°C*
  • Pressure range is from Vacuum to 700 bar*
  • Internal components are reusable
  • 316L Body (and seat where applicable). Follower and cap in 303 or 304
  • Three sealant materials are available
  • * Dependent on sealant and fitting selected

Enquiry Form

1. Thread Size Required

  see table
2. Element diameter

 see table
3. Sealant Type

 see table
4. Quantity Required

Contact Details

Company Name


Your Name


Email


Telephone


Additional Information

If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below



Send Enquiry  
BACK TO TOP
IECEx Thermocouples with Pot Seal

IECEx Thermocouples with Die Cast Alloy Head

IECEx Thermocouples with Die Cast Alloy Head and Process Connection

IECEx Thermocouples with St. / Steel Head

IECEx Thermocouples with St. / Steel Head and Process Connection

IECEx Thermocouples with Dual Entry Head

IECEx Thermocouples with Dual Entry Head and Process Connection

IECEx Thermocouples with Spring Loaded Terminal Block

IECEx Thermocouples with Terminal Entry Gland

IECEx Thermocouples with Terminal Entry Gland and Process Connection

IECEx Spring Loaded Thermocouples

IECEx Thermocouple Feedthroughs
IECEx RTD Pt100 Sensors with Pot Seal

IECEx RTD Pt100 Sensors with Die Cast Alloy Head

IECEx RTD Pt100 Sensors with Die Cast Alloy Head and Process Connection

IECEx RTD Pt100 Sensors with St. / Steel Head

IECEx RTD Pt100 Sensors with St. / Steel Head and Process Connection

IECEx RTD Pt100 Sensors with Dual Entry Head

IECEx RTD Pt100 Sensors with Dual Entry Head and Process Connection

IECEx RTD Pt100 Sensors with Spring Loaded Terminal Block

IECEx RTD Pt100 Sensors with Terminal Entry Gland

IECEx RTD Pt100 Sensors with Terminal Entry Gland and Process Connection

IECEx Spring Loaded RTD Pt100 Sensors
IECEx 4 to 20mA Indicators

IECEx Temperature Transmitters

IECEx Compression Fittings

IECEx Terminal Heads

IECEx Pressure and Vacuum Feedthroughs



© 2014- TC Ltd., PO Box 130, UXBRIDGE UB8 2YS United Kingdom.
Tel.: 01895 252222, Email: info@tc-atex.com