Products

COVID-19 UPDATE: We are open for business as usual and here to assist our customers. Please call on our usual number - 03 9543 8433, or email info@tcaus.com.au

IECEx Approved Pressure and Vacuum Feedthroughs

Series MF - Feedthroughs for multiple elements

A single access port into an enclosure or process vessel is all that is needed to allow multiple probes, sensors, etc., to pass through an environmental or pressure boundary using a single feedthrough assembly.

Series MF feedthroughs can seal multiple elements within a single assembly including typically up to 40 x 1.0mm dia., up to 27 x 3.0mm or up to 7 x 6.0mm elements. Please refer to the table for further details of feedthrough capacity and sizes of elements.

There are five body sizes having 1/8”, 1/4”, 1/2”, 3/4” and 1”process connections in either BSPT (conical gas or DIN 2999 ‘R’) and NPT threads.

Spectite® feedthroughs are designed for ease of assembly and installation. Elements can be adjusted, removed and replaced when not under pressure or vacuum conditions.
  • IECEx Approved to Ex II 2 GD, Ex d IIC Gb / Ex e IIC Gb, Ex ta IIIC Da
  • Saves time and costs as multiple sensors pass through one feedthrough
  • Immersion length of each element can be easily adjusted
  • Five sizes of sealed feedthrough for probes, sensors, etc.
  • Designed for carrying multiple elements
  • Suitable for a mixture of sizes and types of elements
  • Pressure range: Vacuum to 700 bar*
  • Temperature range: -60°C to +450°C*
  • Stainless steel body (316L), internal metal components and cap
  • Reusable fitting – sealant and internal components replaceable
  • * Dependent on sealant and fitting selected

Enquiry Form

1. Thread Size Required


  see table

2. Element diameter


 see table

3. No. of Elements


 see table

4. Sealant Type


 see table

4. Quantity Required


Contact Details


Company Name


Your Name


Email


Telephone


Additional Information


If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below



Send Enquiry  
BACK TO TOP
IECEx Thermocouples with Pot Seal

IECEx Thermocouples with Die Cast Alloy Head and Process Connection

IECEx Thermocouples with Die Cast Alloy Head

IECEx Thermocouples with St. / Steel Head

IECEx Thermocouples with St. / Steel Head and Process Connection

IECEx Thermocouples with Dual Entry Head

IECEx Thermocouples with Dual Entry Head and Process Connection

IECEx Thermocouples with Spring Loaded Terminal Block

IECEx Thermocouples with Terminal Entry Gland

IECEx Thermocouples with Terminal Entry Gland and Process Connection

IECEx Spring Loaded Thermocouples

IECEx Thermocouple Feedthroughs
IECEx RTD Pt100 Sensors with Pot Seal

IECEx RTD Pt100 Sensors with Die Cast Alloy Head and Process Connection

IECEx RTD Pt100 Sensors with Die Cast Alloy Head

IECEx RTD Pt100 Sensors with St. / Steel Head

IECEx RTD Pt100 Sensors with St. / Steel Head and Process Connection

IECEx RTD Pt100 Sensors with Dual Entry Head

IECEx RTD Pt100 Sensors with Dual Entry Head and Process Connection

IECEx RTD Pt100 Sensors with Spring Loaded Terminal Block

IECEx RTD Pt100 Sensors with Terminal Entry Gland and Process Connection

IECEx RTD Pt100 Sensors with Terminal Entry Gland

IECEx Spring Loaded RTD Pt100 Sensors
IECEx 4 to 20mA Indicators

IECEx Temperature Transmitters

IECEx Compression Fittings

IECEx Terminal Heads

IECEx Pressure and Vacuum Feedthroughs



© 2014- TC Measurement & Control Pty Ltd, PO Box 7777, Oakleigh, VIC 3166
Tel.: 03 9543 8433, Fax: 03 9543 8466, Email: info@tcaus.com.au